- SMART PHONE FLASH TOOL ERROR 1013 DRIVERS
- SMART PHONE FLASH TOOL ERROR 1013 UPDATE
- SMART PHONE FLASH TOOL ERROR 1013 DRIVER
Message: Error 8038! Android download pmt is ready and layout has been changed
If you’re certain it wasn’t, try a higher version of SP Flash tool.
Ensure the scatter file wasn’t renamed. Meaning: SP Flash tool doesn’t accept the name format of your scatter file Please check the scatter file name you load is legal Message: Error: Initialize scatter file failed. If you’re trying to format, then ensure you the scatter file you loaded onto SP flash tool has complete firmware file locations. If you’re sure they are, then try formatting before flashing again If you’re trying to flash the firmware, then ensure you’re using the correct files. Meaning: The files you’re trying to flash do not belong to or are not compatible with the phone you’re trying to flash them to OR if you’re getting the error while trying to format then it’s likely you only loaded scatter file without the rest of the files in the firmware Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) Proceed with the Mediatek (VCOM) driver installation steps described here.
If you have installed VCOM drivers but the phone is still only charging then Launch Device manager (Right-click My Computer > Select Manage). Follow the guide to Install MTK VCOM Driver On Windows 8, 8.1 and 10. Meaning: Necessary drivers have not been successfully installed on the PC Select Let me pick from a list of device drivers on my computer. 
Select Browse my computer for driver software. Right-click whatever the phone is detect as and select Update Driver Software…. Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices). Connect the phone to the PC via a USB cord, Device manager should refresh. Launch Device manager (Right-click My Computer > Select Manage). Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing. Try a different USB cord, USB port & PC. Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img, logo.bin and uboot.bin / lk.bin ) The phone automatically disconnecting during flashing: Message: You can see the phone responding to buttons and making a sound but all is blurred by a white screen Please select one ROM at least before execution. Sp flash tool was successful but the phone’s calibration doesn’t work. The phone automatically disconnecting during flashing:. 
Phone shows a white screen, strange colors or divided screen after flashing:.
0 kommentar(er)
